- All substrates MUST be clean (crucially important), even, and load-bearing. Bond-inhibiting surfaces must be removed before the application of DITRA-HEAT-PS. For complete installation guidelines, please refer to the Installation Handbook or video online
- Schluter-DITRA-HEAT-PS is easier and faster to install, it can be repositioned if required with less mess and less cleanup. Can walk on membrane immediately after installation
- Nominal 1/4" (5.5 mm) thickness minimizes assembly thickness of the under tile floor heating system and reduces transitions to lower surface coverings
- The Schluter Ditra heated floor mat MUST be installed without using the mortar bed (thin-set), and can also be used as tile underlayment, and waterproofing.
- Featuring new technology, Schluter Ditra peel-and-stick floor underlayment membrane features a pressure-sensitive adhesive (PSA) to bond the membrane to the substrate, replacing the need for thin-set mortar
Schluter-DITRA-HEAT-PS is a peel and stick membrane that features a pressure-sensitive adhesive (PSA) to bond the membrane to the substrate, eliminating the need for thin-set mortar. Quick and easy to install, DITRA-HEAT-PS integrates customizable, comfortable electric radiant floor heating system warming with the same functions associated with DITRA-HEAT: uncoupling, waterproofing, vapor management, and load support to ensure a long-lasting tile installation. DITRA-HEAT-PS is suitable for applications with engineered wood (plywood), vinyl, wood plastic composite (WPC), luxury vinyl tiles (LVT), luxury vinyl planks (LVP), stone plastic composite (SPC) tiles and planks, and laminate flooring. See the Alternate Floor Coverings over DITRA-HEAT Technical Bulletin for more information, including requirements and limitations. Please note that all substrates must be entirely clean, even, and load bearing. Bond inhibiting surfaces (residue) must be removed prior to the application of DITRA-HEAT-PS. Note: Type, thickness, and format of the tile or stone surface covering must be suitable for the intended application. Minimum tile format is 2" x 2" (5 cm x 5 cm).
